Fun To Do
Affordable, High Performance 3D Printing Resins.
Standard Blend resin is a real multi purpose resin, quite cost effective for printing your day to day objects. The fully cured resin has a hardness of 35 shore D.
The Industrial Blend resin has been developed especially for industrial clients in need of an extra hard resin that maintains its structural integrity while exposed to very high and low temperatures.
Having these properties, it is one of the few resins perfectly suitable for vulcanization.
The hardness of the fully cured Industrial Blend resin is 75 shore D.
It has been tested from -45C to +225C.
All of the resins are designed to be ultra fast!
Curing times of 0.5 seconds for 0.02mm layers are easily achieved on standard DLP printers with an average light source of around 240 Watts.
A broad range of reactivity!
The resin have a very broad range of reactivity that extend from the very short wavelengths of 225nm to the near-visible wavelengths of 415nm. By incorporating a blend of photo initiators and sensitizers, almost any light source can be used to initiate the polymerization process of our resins. No need to modify your expensive DLP projector! Whether using a laser SLA machine or DLP printer with a LED source of illumination, and as long as the wavelength is between 225nm and 415nm, it will work, and it will work fast!
The Fun To Do resins have ultra low shrinkage!
Where 3.5% is regarded as little shrinkage, we have limited the shrinkage to 0.5%.
It is basically what you see is what you get. 3.5% shrinkage seems to be relatively small, but if you have an object of 10cm (100mm), 3.5% is 3.5 mm which is nearly half a centimeter! Compare that to the 0.5mm the Fun To Do Resins achieve.
A natural resistance to water and most chemicals!
Fun To Do resins have a naturally water resistant. In liquid form, they are highly hydrophobic. Once fully cured there are few chemicals that can disolve these resins. The Industrial blend has an especially high resistance to chemicals. Cured prints have been withstanding the elements and various chemicals for several years now!
User Friendliness makes you want to build more!
When designing the resins, quite some effort was taken in making them as user friendly as possible. These efforts have resulted in a series of low odor resins with minimal skin irritation.
Affordable resins make it possible for you to build more!
By using these affordable resins, you can experiment, extend your knowledge about supports, exposure times, and material thickness without having to worry about the cost of the material.